Loading
20.10.2025
Viewed by 178 visitors178

MINI how-to guide: This is how you change the Road Priority Warning settings in your MINI with Operating System 9.

The Road Priority Warning in your MINI with Operating System 9 supports you in situations where you have to give way due to road signs or traffic lights. The system warns you if there is a risk of failure to give way at give-way signs, stop signs or red traffic lights.

Requirements:

  • Your MINI with Operating System 9 requires the option "Driving Assistant Professional" (SA 5AU) ex works.
  • The right of way must be clearly regulated by road signs or traffic lights.

Important notes:

  • The system warns from a variable minimum speed and up to approx. 80 km/h.
  • The selected setting for the warning time is adopted for the next journey.
  • Depending on the equipment, the warning is simultaneously displayed in the Head-up Display and in the MINI Interaction Unit.
  • The system warns in two stages depending on the current driving situation and the set warning time:
    • Advance warning: visually indicated by an icon in the MINI Interaction Unit.
    • Acute warning: visually indicated by an icon in the MINI Interaction Unit with additional acoustic signal.

System limits:

  • The system only takes into account objects located in the detection range of the installed sensors and detected by the system.
  • The function of the camera may be restricted, e.g. in heavy fog, wet conditions or snowfall, on steep hills or dips, in tight bends or when the camera field of view is obscured.
  • The function of the Road Priority Warning may be limited in the following situations:
    • If road signs or traffic lights are unclear, completely or partially obscured or dirty, poorly visible, twisted, too small or too large.
    • In case of road signs that do not comply with the standard.
    • In case of road signs that apply to a joining or parallel road.
    • In case of country-specific road signs or road layouts.
    • At road junctions with flashing traffic lights.
    • Up to ten seconds after the drive-ready state was switched on via the Start/Stop switch.
    • In case of invalid, outdated or unavailable navigation data.

The availability, operating principle and system limits vary depending on the country of delivery and the equipment of your MINI.

 

Step 1:
Press the direct access button "Driving settings menu" in the control centre.

Alternatively, select the following in the MINI system: Apps menu > "VEHICLE" (menu bar at the top) > "Driving settings".

 

Step 2:

Select "Driver assistance".

 

Step 3:
Select "Safety and warnings".

 

Step 4:
Select "Road Priority Warning".

 

Step 5:
Select the desired setting.

 

Note: You can also set the warning time in the "Road Priority Warning" menu. The selected setting is saved and adopted for the next journey.

Was this article helpful?

Related articles

    125,545

    The front-collision warning in your MINI is designed so that you can still prevent an impending collision by acting quickly. If you do not react, Brake Assist automatically init...
    8,249

    Distance Control allows you to set a distance to a vehicle in front in addition to Cruise Control. To deactivate Distance Control in your MINI with a MINI Controller and MINI sy...
    8,212

    Collision Warning with light braking function in your MINI is intended to actively support you at defined speeds in the prevention of rear-end collisions or to mitigate the cons...
    7,506

    Lane Departure Warning with active return in your MINI with Operating System 9 warns you when your MINI is about to leave the road or the driving lane. Depending on the equipmen...
    16,752

    Park Assist in your MINI supports you when parking in parking spaces parallel or perpendicular to the road. Park Assist measures a parking space with ultrasonic sensors when dri...
    7,117

    To activate the speed limiter in your MINI, press the "LIM" key on the steering wheel. The currently driven speed is taken over as speed limit. When switched on at a standstill ...
    6,419

    In your MINI, you can activate "Active Cruise Control" with the Assist key on the left steering wheel spoke. You can deactivate the "Active Cruise Control" by pressing the key a...
    6,360

    To set the speed limit warning in your MINI, select the following in the MINI system: "My MINI" > "Vehicle settings" > "Speed limit warning" > "Warning at:" and select the desir...
    5,154

    To activate the High-beam Assistant in your MINI, press the button on the turn indicator lever. When the low-beam headlight is switched on, the indicator light on the instrument...
    5,131

    Parking Assistant includes Reversing Assistant, a Reversing Assist Camera, Active PDC (Park Distance Control), Lateral Parking Aid, parking-drive off monitoring and an emergency...
    5,110

    The drive-off assistant in your MINI enables comfortable driving off on inclines without applying the parking brake: After releasing the brake pedal, the vehicle is held for a s...
    4,160

    The red lines in the image of the Reversing Assist Camera of your MINI indicate the route with a maximum steering wheel angle. The green driving lane lines adapt to your steerin...
    4,088

    The rain sensor regulates the windscreen wipers and the low-beam headlight during rain and at twilight. The rain sensor is located at the upper edge of the windscreen, detects d...
    3,636

    The driver assistance system "Speed Limit Info" in your MINI with Operating System 9 warns you by means of a visual and acoustic signal if the detected speed limit is exceeded o...
    3,271

    The display of current speed limits via the "Speed Limit Info" display requires that your MINI has the latest version of the navigation map installed. The accuracy of the "Speed...
    3,264

    In your MINI, a symbolised green car in the instrument cluster indicates that the Lane Departure Warning is active. At least one lane boundary line has been detected and warning...
    2,988

    Lane Departure Warning warns you if your vehicle is about to leave the road or driving lane by means of a vibration in the steering wheel and by displaying warnings in the instr...
    2,921

    Requirements: Lane Change Warning, rear collision warning, exit warning for objects approaching from behind, Front Collision Warning with brake intervention and Lane Departure W...
    2,864

    This MINI how-to video describes how to use the Reversing Assist Camera of your MINI. MINI how-to video: https://youtu.be/IiGQy2_DWoc
    2,841

    Distance Control allows you to set a distance to a vehicle in front in addition to Cruise Control. To activate Distance Control in your MINI with a MINI Controller and MINI syst...

MINI AI Assistant

0 / 200

Loading
Driver assistance systems [MINI] - Intelligent driving - Road Priority Warning (OS9) - Change settings