Loading
996

What information do I receive in the MINI App about completed charging processes?

To view completed charging processes for your MINI electric or plug-in hybrid vehicle, proceed as follows:

  1. Open the "Vehicle" tab.
  2. Select "Charge".
  3. Open the "Charging history" and select a charging process.

In the detailed view, you can see the times at which the vehicle was plugged in and unplugged, the amount of energy charged, the average charging power, the charge curve, the charging time and the charging location, including the address and a map view. If an electricity tariff has been stored for a charging station, the costs per kWh and the total costs will also be displayed. Cost-optimised charging processes are identified and controlled by connected providers in order to prefer charging times when electricity prices are low. The provider responsible is also shown. The costs shown might be estimates and could differ from the final amount. Click on the info icon at the top right for further helpful information about charging processes.

Please note: As long as your vehicle is added to your MINI ID in the MINI App, charging processes are recorded and stored in the charging history. If you remove your vehicle from the app, the data will remain stored in the MINI Cloud for 3 months. If the vehicle is added again within this time frame, the saved data will once again be available in the charging statistics. However, any charging processes carried out in the meantime will not be added retrospectively. The availability of individual display options, particularly those relating to cost-optimised charging processes, may vary depending on the national-market version.

The following MINI how-to video gives you an overview of your MINI's charge management. From the second half of the video onwards, you'll also learn more about the charging history:

MINI how-to video on charge management and charging history – Link to the MINI how-to video

Was this article helpful?

Related articles

    14,383

    Follow these steps in the MINI App to export the data of the most recent charging processes for your MINI electric or plug-in hybrid vehicle: Open the MINI App. Switch to the “C...
    1,652

    The MINI App does not display any information about a completed charging session for your MINI electric or plug-in hybrid vehicle in the "Charging history" (in the "Charging" se...
    702

    The MINI App displays a charge curve for completed charging sessions of your MINI electric vehicle with Operating System 9 in the menu "Vehicle" > "Charging" > "Charging history...
    637

    The MINI App calculates the amount of energy charged depending on the state of charge of your MINI, any charging losses and the amount of energy required for the set climate con...
    62,473

    Depending on the country of delivery, model and equipment, you can air-condition, heat or ventilate your MINI immediately or at a departure time via the Remote Services in the M...
    23,602

    You can currently use the following Remote Services in the MINI App: Check vehicle status, lock/unlock doors, activate headlight flasher, activate horn, start climate control, s...
    19,046

    In the MINI App, you can see the time of the last update of the vehicle status below the vehicle image. Your MINI sends current data on the vehicle status after each locking. MI...
    15,719

    Yes. To set a preferred time frame for the charging process for your MINI electric or plug-in hybrid vehicle in the MINI App, e.g. to take advantage of a favourable night-time e...
    13,872

    No. In MINI vehicles that were produced with a MINI system before the introduction of MINI Operating System 9 (from 11/2023), you cannot set a charging target in the vehicle or ...
    12,102

    To set up Amazon Alexa Car Integration in your MINI, select the following in the MINI App: "Vehicle" (tab) > "Vehicle settings" ("Vehicle control centre") > "Amazon Alexa" > "Al...
    11,676

    No. Your MINI with a MINI Controller and MINI system with a menu with displays in the form of tiles (ID6) can only be added to one MINI ID in the MINI App. Please note: You can ...
    10,969

    This MINI how-to video describes how you use the MINI App to air-condition the passenger area of your MINI electric or plug-in hybrid vehicle immediately or at a set departure t...
    9,155

    Yes. The MINI App informs you about an unplanned interruption of the charging process of your MINI electric or plug-in hybrid vehicle via a push notification. With the push noti...
    8,588

    Depending on the model and equipment, you will find an overview of your journeys in the MINI App in the "My Trips" menu (in the "Vehicle" tab). The following sections are availa...
    8,275

    To save a profile image for your MINI ID, select the following in the MINI App: "Profile" (tab) > "+" icon next to your name. In your MINI with Operating System 9, the profile i...
    7,492

    No. In your MINI with a MINI Controller and MINI system with a menu with displays in the form of tiles (ID6), you cannot start or stop a charging process for your MINI electric ...
    7,429

    After a tyre change of your MINI with Operating System 9, your MINI Service Partner scans the QR code of the newly fitted tyres and programs the Tyre Pressure Monitor. In the MI...
    7,406

    The country and language settings of your MINI ID determine, among other things, which vehicles you can add to your MINI ID and which MINI Connected services and apps you can vi...
    5,929

    You can customise the MINI App's permissions for accessing your smartphone's location, camera, Face ID, photos, camera and mobile data, for example. To allow or restrict access ...
    5,922

    To start charging at a public charging post by reading out a QR code, select the following in the MINI App: "Vehicle" (tab) > "Charge on the road" (in the "Charging" section) > ...

MINI AI Assistant

0 / 200

Loading
MINI App - Charging - Charging history - Information on charging processes