To reset the Tyre Pressure Monitor in your MINI with a MINI Controller and MINI system with a menu with displays in the form of tiles (ID6), select the following in the MINI system: "My MINI" > "Vehicle status" > "Tyre Pressure Monitor" and make sure that the tyre settings are correct. Start the engine and stop. Then select "Reset" and drive off. The wheels are shown in grey on the MINI Interaction Unit and the message "Tyre Pressure Monitor reset is being carried out..." appears. After a driving time of several minutes, the set tyre pressures are adopted as target values. Reset is automatically completed while driving. The wheels are then shown in green on the MINI Interaction Unit and the message "Tyre Pressure Monitor active. Set values see fill pressure sign." is displayed.
1,127
How do I reset the Tyre Pressure Monitor in my MINI with a MINI Controller?
Was this article helpful?
Related articles
8,923
8,302
6,890
5,316
45,791
44,807
23,408
22,464
20,219
16,470
14,398
13,758
13,418
13,331
12,366
12,148
10,855
9,392
9,134
8,849